Doremi Fidelio - Manual (Page 31)

FDO.OM.001852.DRM Page 31 of 77 Version 1.5
Doremi Labs
Figure 34: Audio Interface for RJ45 Setups
3.3.1.4 Audio Interface to Fidelio
 You will now need to connect one BNC cable (NOT provided) to the Fidelio Audio
Interface Box BNC connector labeled, “AES OUT CH 15/16” (Figure 34).

Connect the other end of this BNC cable to the Fidelio Transmitter box BNC connector
labeled, “AES IN 2” (Figure 33).
 Now connect another BNC cable (NOT provided) to the Fidelio Audio Interface Box BNC
connector labeled, “AES OUT CH 7/8” (Figure 34).
 Connect the other end of this BNC cable to the Fidelio Transmitter box BNC connector
labeled, “AES IN 1” (Figure 33).
 Your connections concerning the projection booth are now complete.