Datamax S-Class ST-3210 - Manual (Page 23)

ST/SV-3210 and ST/SV-3306 13
3.3 Installing a Memory Module
Optional Flash Memory Modules offer convenient, non-volatile storage
of formats, fonts and graphics. Refer to the DPL Programmer’s Manual
(part number 88-2051-01) for programming and use details. To install a
module:
Œ Turn ‘Off’ the printer.
• Place the Memory Module’s
‘write protect’ switch into
the desired position (in
the ‘On’ position the
module cannot be
written to).
Ž Carefully insert the
Memory Module into the
Memory Module Slot.
• Turn the printer ‘On’.
CAUTION
To avoid damage to the Memory Module or the printer,
only use modules designed for this printer and always
turn the printer ‘Off’ before inserting or removing the
module.