Dataman Vali-Flash 4.1 - Manual (Page 7)

- 7 -
License Transfer
If at some point you want to use Vali-Flash on a different computer you will need to perform a license transfer.
Start the Vali-Flash application and select HelpÆLicense Manager. You will be presented with the following dialog.
Figure 6 - License Manager - Licensed
In order to process a license transfer you must remove the active license and request a new code. Once you remove
the license you will be given a remove code. This remove code will be used to generate a new activation code on
another computer with the online registration. Enter your activation code and click on the remove license button. If
you are unable to locate your activation code please take a look at the file
license.TXT which will have the code
recorded.
Once you have confirmed that you want to remove the license, Vali-Flash will issue a remove code as shown.
Figure 7 - License Manager - Remove Code
Always make sure to record this number in a safe location. This code is also saved to file License.TXT .
The license removal process will not delete or un-install Vali-Flash. It will just make Vali-Flash expire and it will
generate a different site code. This new site code will require a new activation code in order to unlock or activate Vali-
Flash. If you want to completely remove Vali-Flash you will have to go to Add/Remove programs and remove it from
there.
Once you have your remove code you will then want to install Vali-Flash on the new computer. Once you have
completed this, you will need your removal code from the old computer, your serial number, and your new site and
new mid code from the new computer.
Then, please visit:
http://www.dataman.com/Registration/ValiFlash.aspx and click License Transfer. The online
registration instructions should be self-explanatory. If you have any additional questions or concerns please contact
Dataman. Dataman contact details are on page 20.
License Removal
The procedure is exactly the same as a license transfer, except you would not re-register the software and obtain a
new license. Please see the above section for more information.
Other questions or concerns should be directed to the Dataman Support Team. Please see page 20 for contact details.