CUE controlCUE - Manual (Page 3)

3
controlCUE Controllers | Introduction
© CUE, a.s. | All Rights Reserved.
Introduction
Overview
Ethernet IP enabled high-end controllers equipped with variety types of control ports. They are at least ten
times more powerful compare to ipCUE controllers lineup.
Control ports include bi-directional serial channels RS-232/422/485, serial outputs, infrared outputs up
to 1.2 MHz, general I/O ports that can be configured as analog inputs or digital outputs and 24 volts relay
outputs. The Ethernet port allows for bi-directional IP control of any manufacturer IP enabled products. All
models are fully compatible with CUE‘s existing range of button panels and touch panels through and comes
equipped with a CUEwire port.
Internal IR sensors allow capture IR codes and receive IR codes from hand-held transmitters. Convenient for
testing and troubleshooting this model also comes with front panel indicator LEDs that indicate the status of
all the control ports.
The controller keeps date and time with its on-board real time clock (RTC) and thus allowing for a wide
variety of distributed intelligence scheduling applications.
All models comes complete with a web server and allow for setup through a standard web browser.
Enclosure allows installation to 19” rack using Rack Mounting kit.
Models And Accessories
Model Product Code Description
controlCUE-one CS0412 Controller with 2x serial, 4x IR/serial output, 4x general I/O, 2x relay
controlCUE-two CS0414 Controller with 6x serial, 8x IR/serial output, 8x general I/O, 4x relay
Rack Mounting Shelf CS0449 Rack mounting kit for up to 2 controllers
IR Adapter /i CS0256 Infra-red emitter
Opto-Input Adapter /i CS0257 Photosensitive cell sensor
IR Sprayer CS0295 IR control signal emitter
Serial IO Cable DTE /i CA0181 RS-232 serial cable DTE
Serial IO Cable DCE /i CA0182 RS-232 serial cable DCE
Cable RS-485 to PEbus CA0183 RS-485 cable between controller and switching units, dimmers, interfaces
Common Features
▪ Ethernet IP enabled high-end controllers
▪ Modern ARM® processor platform
▪ Internal RAM 256 MB RAM
▪ Internal microSD Card min. 4 GB
▪ Wired 10/100 BaseT LAN
▪ Onboard real time clock
▪ Control ports
▪ Bi-directional serial RS-232/422/485
▪ IR /serial outputs (IR up to 1.2 MHz)
▪ General I/Os
▪ Relays NO-C-NC 24 V
▪ Audio line input and output
▪ Web server and Admin Web pages for setup
▪ Unified aluminium enclosure design for desktop, 19” rack
▪ Rack, DIN rail and wall installation - no special models required
Programming
All controllers have to be programmed using Cue Visual Composer. These models are not compatible with
Cue Director XPL.