Ir capture, 21 ir capture, Ir remoter – CUE controlCUE User Manual
Page 21: Button start capture
21
controlCUE Controllers | IR Capture
© CUE, a.s. | All Rights Reserved.
IR Capture
All controllers have possibility to capture IR codes. Captured IR codes can be used in all types of controllers,
touch panels and touch panel controllers.
Steps are as follows
1. Connect controller to your PC as described in the chapter PC Connection.
2. Arrange IR remoter and controller as described below.
IR remoter
1
2
1
2
3
4
1
2
1
2
3
4
SERIAL
IR/SERIAL
GENERAL I/O
RELAY
IR SENSOR
PWR LINK CPU
3. Start Cue Visual Composer and go to appropriate driver and command.
4. Push Start Capture button in Cue Visual Composer and then press appropriate button on IR remoter.
Button Start Capture