CUE Wireless Touch Panel - Manual (Page 28)

28
Wireless Touch Panel | User Manual | Admin Web
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
System
Firmware
This page is used for updating the CUEunit firmware. The
Current version of firmware is shown. To upload new
firmware, select the desired version, and click the Upload
button.
Information
The page shows basic information about your CUEunit’s
hardware. The CPU type, CPU frequency, and the flash and
RAM memory sizes are shown.
Format Data Area
To completely clear all data and restore factory default
settings, click the Format data area button.
This will remove all data, including Applications and File
storage files. Configuration will be cleared, including IP
address and password. IP address will be restored to the
default 192.168.1.128.
Password
A case sensitive password is necessary to login to the
admin web pages. Set a new password via the New
password box. You must reenter the password in the
Confirm new password box. An error message will appear
if the confirmation does not match, in which case you
should reenter your password again in both boxes.
Finally, the new password is implemented by clicking the
Apply button.