Setup, Wireless communication settings, Pc connection – CUE Wireless Touch Panel User Manual
Page 16: Access admin web
16
Wireless Touch Panel | User Manual | Setup
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Setup
Wireless Communication Settings
Provide following steps
1. Press multifunctional button to switch on the touch panel.
Multifunctional button
2. Press button on front panel again to activate On Screen Display (OSD).
3. Select IP Settings screen.
192.168.1.128
255.255.255.0
192.168.1.1
4. Set IP Address, Subnet Mask, Default Gateway, SSID, Security Type and Security Key corresponding
to your wireless network.
PC Connection
For direct PC connection use wireless network.
Wireless
Network
Access Admin Web
Run the Internet browser on your PC and type in the touch panel IP address (factory default 192.168.1.128 or
IP address set in previous step).
If password protection is used, the Admin login web page will be displayed. If no, the configuration page is
displayed.