Settings, 27 settings, On screen display – CUE Wireless Touch Panel User Manual
Page 27
27
Wireless Touch Panel | User Manual | Admin Web
© CUE, a.s. All Rights Reserved. | www.cuesystem.com | [email protected]
Settings
Settings
The Backlight Saver will switch off automatically display
backlight. Time in minutes can be set. Time set to 0
means that Backlight Saver is disabled.
Standby mode will be reached automatically if enabled
- time is set to specific value. Time set to 0 means that
Standby is disabled.
LCD Backlight sets display backlight level.
If Adaptive Brightness is selected to Dark, Normal or
Bright, the light sensor automatically adjusts display
backlight according ambient light level.
If Motion Sensor is switched to Yes, the Motion Sensor
resumes touch panel from Backlight Saver mode
automatically.
On Screen Display
On Screen Display mode can be set to
▪ Basic - some OSD pages are disabled. This mode
doesn’t allow to change IP settings, date/time and
applications.
▪ Advanced - all OSD pages are enabled.