Using – CUE irCUE User Manual
Page 5
User Manual irCUE
www.cuesystem.com
Page 5 of 20
2. Using
The irCUE is connected to the rest of control system via IR communication. As IR receiver you can
use IR receiver built-in controllers (ipCUE-alpha, beta, delta, epsilon) or external unit irCUE Receiver
485 or receivers built-in keypadCUE-8-L, keypadCUE-8-E.
The example of irCUE, ipCUE controller and irCUE Receiver 485 configuration is described in the
picture below.
CUEwire
irCUE
irCUE Receiver 485
ipCUE-xxx
Notice: to enable the IR receiver on ipCUE controller, make the following two steps:
Enable IR receiver in AdminWeb of controller. In the menu Configuration – IR receiver
select “IR receiver controlled by XPL application” item.
Place the command IrReceiverEnable to the Autoexec sequence of the controller program