Addressing – CUE irCUE User Manual
Page 13
User Manual irCUE
www.cuesystem.com
Page 13 of 20
7.3. Addressing
It is possible to add an offset to a BUTTON_ID sent by the panel using irCUE Receiver 485. It can be
very helpful in multi-room installation - the same panel can be identified in each room. That means one
panel can start different actions in different rooms - see example in the picture below.
ADDRESS = 0
ADDRESS = 2
ADDRESS = 4
Room 1
Room 2
Room 3
CUEwire
connected to a control unit
The receiver sends codes
from 1001 to 1064
The receiver sends codes
from 1065 to 1128
The receiver sends codes
from 1129 to 1192
The irCUE sends codes
from 1001 to 1064
(1001 to 1032 without Fn button
1033 to 1064 with Fn button)