CUE irCUE - Manual (Page 15)

User Manual irCUE
www.cuesystem.com
Page 15 of 20
8. Troubleshooting
1. The brightness of LEDs is visibly decreasing and the charging indicator flashes every few
seconds
 The accumulator is going to be discharged.
 Charge the accumulator immediately.
2. When pressing the button, the LEDs go on and off immediately.
 The accumulator is totally discharged.
 When waking up from the sleep mode it tries to light on the LEDs.
 Increased consumption causes a drop in voltage, which as a result resets the
microprocessor.
 Charge the accumulator immediately.
3. The IR operating range is short.
 Check the accumulators in the panel and recharge them.
 Change the position of the panel or receiver.