CRU ToughTech Secure 128 Q User Manual
Page 4
CRU
U s e r M a n u a l f o r T T - Q , T T S - Q ( A 9 - 0 0 0 - 0 0 0 1 r e v 1 . 5 )
- 4 -
2.1.3
Ensure that the shock absorbers are installed in the mounting brackets with the “thin” side facing
outward.
2.1.4
Rest your 3.5” SATA hard drive in the tray. Connect ToughTech’s data and power cables to the
receptacles on the hard drive, as shown in the pictures below.
SATA Power SATA Data
2.1.5
Locate the plastic bag containing four auto-limiting screws included in the package.
2.1.6
Insert and tighten each of the four drive screws, making sure that the holes in the shock absorbers
line up with the screw holes on the sides of the drive. The shock absorbers will
compress slightly, but do not over tighten the screws.
Auto-limiting Screw