CRU RTX410-IR - Manual

R T X - I R Q u i c k S t a r t G u i d e A 9 - 4 6 8 - 0 0 0 5 - 1 R E V 1 . 0 - 1 -
RTX™ IR Quick Start Guide
Revised February 3, 2012
This Guide covers the essentials for getting your product up and running. For more comprehensive
technical information, see the full User Manual, available for download at
cru-dataport.com.
Note: The contents reflect operational instructions for RTX IR units manufactured after 12/15/2011. RAID
sets created in RTX IR units manufactured prior to this date are incompatible with newer units.
Table of Contents
1. About iSCSI Technology 2
2. Pre-Setup Steps 2
2.1 iSCSI Initiator software 2
2.2 RTX-IR accessories 3
2.3 Hard Drive Installation 3
3. Setting up Your RTX 3
3.1 Connecting to your network (or computer) for configuration 3
3.2 Using a web browser to access the GUI 3
3.3 Using the GUI to configure the RAID. 5
3.4 Manually Creating a Usable RAID Set 5
3.5 Manually Creating a Virtual Disk 7
3.6 Manually Attaching a Logical Unit 8
3.7 Quick Installation 8
3.8 Connecting to your network (or computer) for data access 9
3.9 Accessing RTX Using iSCSI Initiator Software 9
3.10 Creating volumes over 2TB in size 9
4. Usage with Mac and Windows Operating Systems 10
5. Warnings and Notices 12
6. Technical Specifications 13
For models
RTX410-IR,
RTX610-IR and
RTX801-IR