Technical specifications – CRU RTX100-INT User Manual
Page 4
WiebeTech
R T X 1 0 0 - I N T U s e r M a n u a l A 9 - 1 0 0 - 0 0 0 1 R E V 1 . 0
- 4 -
Technical Specifications
Product name/code:
RTX100-INT
Host Interfaces:
SATA
Data Interface Speeds:
SATA 3.0GHz (up to 300MB/sec)
Hardware Requirements:
•
Empty 5 ¼” bay in a Windows or Linux-based PC
•
internal power and SATA ports
Drive Types Supported:
3.5” SATA (Serial-ATA) hard drives up to 750GB+
TrayFree™ Technology:
Yes
Shock Absorbing Bay:
Yes
Operating Temperature:
50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity:
5% to 95%, noncondensing
Safety Certification:
CE/FCC
Shipping Weights:
1 pound, sans drive
2 pounds, with drive
Dimensions:
(184 L x 149 W x 42 H)
Warranty:
1-year limited warranty. See warranty statement for details and limitations.
WiebeTech offers free phone support for 90 days after purchase (1-866-744-
8722). After 90 days, email support is available at
.
RTX100-INT and TrayFree are trademarks of WiebeTech LLC. Other marks are the property of their respective
owners.
© 2008 WiebeTech LLC. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that your unit is plugged into a grounded electrical outlet.
2)
Use a data cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact
for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact
. We
appreciate being able to serve you!
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE