Crompton Controls DCM - Manual (Page 6)

Emotron AB 01-2120-01r2 Safety 5
2 Safety
• Study this manual thoroughly before installing and using the Emotron
DCM.
• The Emotron DCM must be installed by qualified personnel.
• Always disconnect supply circuits prior to installing.
• The installation must comply with standard and local regulations.
• Pay special attention to the information in this chapter and the parts marked
WARNING and CAUTION in the chapter on operation.
• Check that the Emotron DCM and the equipment are correctly connected
before being taken into use.
• Should questions or uncertainties arise, please contact your local sales outlet
or see Chapter 12 page 59, Service.
• Faults that arise due to faulty installation or operation are not covered by the
warranty.
NOTE: Removing or tampering with the seal on the housing will invalidate
the warranty.