Crompton Controls DCM User Manual
Page 56
Emotron AB 01-2120-01r2
Window Parameters
55
21
Pit volume and level setting,
see Fig. 11, page 23 and Fig.
14, page 32. See also note on
page 22. NOTE! The window is
not shown when the DCM is
SLAVE.
1.0 to 10.0
1.0
22
Maximum pause time.
NOTE! The window is not
shown when the DCM is
SLAVE. Symbol
.
0 to 900 s
15 - 720
min.
600 s
23
Start-up delay.
Symbol .
1 to 170 s
5 s
24
Stop delay.
Symbol .
1 to 90 s
2 s
31
High temperature on pump
motor or motor protection
alarm, terminal 5 (on). Turn off
(OFF).
on / OFF
OFF
32
Latched alarm, terminal 5 (on).
Alarm not latched (OFF). Can
only be used when window 31
is (on).
on / OFF
OFF
41
Phase asymmetry permitted.
OFF/ 5 to
50%
10%
42
Phase asymmetry latched
alarm (on). Phase asymmetry
alarm not latched. (OFF) Can
be used when window 41 is set
between 5-50%.
on / OFF
OFF
Table 8
Window parameters and defaults
Window
Function
Value
Default
Custom
setting
Master Slave