Crompton Controls DCM - Manual (Page 21)

20 Installation Emotron AB 01-2120-01r2
Table 3 Symbols on the LCD display
Symbol Meaning
Flashing when alarm triggered.
Indicates when the value is a time.
Parameter settings are locked.
V Volt
mA Milliampere
m Minutes
S Seconds
% Percent
Table 4 Function of the keys
Key Function
RESET/START Resets a latched alarm/Starts the pump motor.
Auto set
The stop level is automatically set when the button is pressed
for 3 s.
NEXT Proceed to the next window.
-
Decrease the displayed value. For fast incremental decrease,
press the button for 6 s.
+
Increase the displayed value. For fast incremental increase,
press the button for 6 s.
ENTER Confirms the adjustments made.