CP Electronics VITP-IR - Manual (Page 4)

4
3. Fixing & Wiring (continued)
2 x VitessePlus RJ45 Connections
for Cat 5 patch leads
When mounting the detector:-

Avoid direct sunlight entering the sensor.

Do not site within 1m of forced air heating or ventilation.

Do not site within 1m of any lighting.

Do not fix to a vibrating surface.
FLUSH FIXING
SURFACE FIXING
1 2
2 1
Hole Ø64mm
Warning - be careful bending
springs when mounting unit.
Pull out spring tab and rotate
spring arm as shown
50mm or 60mm fixing centres