CP Electronics VITP-IR - Manual (Page 12)

12
Ref #WD157 Issue 5
LOAD
See datasheet for VitessePlus marshalling box
SUPPLY VOLTAGE
12VDC
TIME OUT PERIOD Adjustable 10 seconds to 99 minutes
LIGHT LEVEL Light to dark
FIXING METHOD Spring fixing, or surface fixing using additional Part No. DBB
(Surface mounting box)
MATERIAL Flame retardant ABS
TYPE Class 2
TEMPERATURE -10°C to 35°C
CONFORMITY EMC-89/336/EEC
LVD-73/23/EEC
VITP-PD/IR VitessePlus presence detector with IR control (and dimming output)
DBB
Surface mounting box
VITP-MB
VitessePlus marshalling box (non-dimming)
VITP-MBDSI VitessePlus dimming marshalling box DSI (digital dimming)
VITP-MBD VitessePlus dimming marshalling box 1-10V (analogue dimming)
UHS
User handset with on/off override and lux up / lux down adjustment
UHS3 User handset with on/off override and cancel only
UHS3/2 User handset with off override and cancel only
DD-LCDHS
IR remote control programming handset with LCD screen
7. Specification
8. Part Numbers
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax: + 44 (0) 333 900 0674
www.cpelectronics.co.uk
[email protected]
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE wiring regulations.
Due to our policy of continual product improvement CP Electronics reserves the right
to alter the specification of this product without prior notice.
FM 45789 EMS 534520