CP Electronics VITM 6 - Manual

VITM6-S
Vitesse modular starter for dimming systems
VITM6-E
Vitesse modular extender for dimming systems
202mm
150mm
14
6m
m
12
7m
m
122mm
75mm
Fixing points
M6 (1/4”)
The Vitesse modular system is a cost effective method of providing power and control for lighting installations in indus-
trial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected using the
spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors. The modular
approach allows for between 4 and 16 luminaires to be connected. The VITM6 is for use with dimming luminaires. The
VITM6-SELVMOD converter provides SELV switch inputs to allow digital dimming whilst also overcoming the require-
ments of the IEE 17 th edition wiring regulations cost effectively.
9 pole interface
connector and lead
supplied with
detectors
VITM6-SELVMOD
Pluggable
dimming switch
module
Channel for channel nuts (zebs)
Removable gland plate with
3 x Ø20mm knockouts
3 x Ø20mm knockouts for rear
cable entry
4 x key slots to accept M6 (1/4”)
fixings
BESA box fixings
Warning. This device works at mains voltage. Be sure to take care when working with electricity.
 The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.
 Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.
Height - allow 150mm for total height of unit (including connectors and cable)
Overview
Vitesse Modular 6 - Dimming Modules
Product Guide
VITM6
System Components
Installation