CP Electronics VITM4-2CH-2S - Manual

 The Vitesse modular system is a cost effective method of providing power and control for lighting installations in in-
dustrial, commercial and retail buildings. The system is designed for ease of installation: mains input is connected
using the spacious wiring compartment; control inputs and outputs are pluggable using industry standard connectors.
The modular approach allows for between 4 and 16 luminaires to be connected.
 The VITM4-2CH-2S is a two channel, non-dimming distribution box for use in applications that require two independ-
ent supplies for switching lighting or lighting and ventilation circuits. For example this product is ideal for installations
that have essential and non-essential supplies for lighting circuits and require common switching using presence de-
tectors. This product provides connections for separate Live, Neutral and Permanent Live inputs.
VITM4-S-2CH-2S
Vitesse modular starter for non-dimming systems
VITM4-E-2CH-2S
Vitesse modular extender for non-dimming systems
Channel for channel nuts (zebs)
Removable gland plate with
3 x Ø20mm knockouts
3 x Ø20mm knockouts for rear
cable entry
4 x key slots to accept M6 (1/4”)
fixings
BESA box fixings
202mm
150mm
14
6m
m
12
7m
m
122mm
75mm
Fixing points
Warning. This device works at mains voltage. Be sure to take care when working with electricity.
 The box should be fixed on a smooth, flat surface or using drop rod fixings attached to channel nuts.
 Ensure that there is easy access to the wiring compartment and all connectors once the box is in-situ.
Height - allow 150mm for total height of unit (including connectors and cable)
9 pole interface
connector and lead
supplied with
detectors
Channel 1 Channel 2 Channel 1 Channel 2
Overview
Vitesse Modular 4 - 2 Ch / 2 supply Switching Modules
Product Guide
System Components
Installation
VITM4-2CH-2S