CP Electronics VITMR-MWS3A-PRM - Manual

Overview
The VITMR-MWS3A-PRM Microwave presence detector
provides automatic control of lighting loads. This sensor is
supplied pre-wired with a 3m lead and include a ceiling
rose for ease of installation.
The VITMR-MWS3A-PRM detects movement using a
highly sensitive microwave detector. This works by emitting
low power microwave signals and measuring the reflections
as the signals bounce off moving objects.
The output channel comprises a mains voltage relay
capable of simple on/off switching.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight.
The VITMR-MWS3A-PRM has a unique adjustable sensor
head that allows the area of detection to be optimised for
the application.
All functionality is fully programmable using an IR handset.
Features
Microwave Presence/Absence Detector IR & Ceiling Rose
VITMR-MWS3A-PRM
Product Guide
Microwave Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
Walk Test LED active when movement is detected
Valid setting received
Front features
Sensor Lens
which covers...
Microwave Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel
Front features
Sensor Lens
which covers...
Microwave Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel