CIRCUTOR CVM144 Series - Manual (Page 58)

----- Supply network analyzer CVM-144 ------ User's manual --- Page No. 57
Insertion of a new module
6. Place the expansion card into the side rail
(The 2
nd
one from the top) checking that the
components keep under the card.
7. Smoothly insert the card, checking that the
frontal pins correctly fit into the connector,
until the card keeps firmly fixed.
8. Cut the necessary removable pieces out from
the rear cover to permit it to be properly hold.
9. Place the CVM-144 rear cover back.
Detection of a new expansion module
10. For versions 6.xx and later ones, the expansion module detection process is
automatically performed by the power meter.