CIRCUTOR CVM96 Series - Manual (Page 33)

----- Supply network analyzer CVM 96 ---------- ------- Page No. 32
7.- SAFETY CONSIDERATIONS
All installation specification described at the previous chapters
named INSTALLATION AND STARTUP, INSTALLATION MODES
and SPECIFICATIONS.
Note that with the instrument powered on, the terminals could
be dangerous to touching and cover opening actions or elements removal may allow
accessing dangerous parts. This instrument is factory-shipped at proper operation
condition.
8.- MAINTENANCE
The CVM 96 does not require any special maintenance. No adjustment,
maintenance or repairing action should be done over the instrument open and
powered and, should those actions are essential, high-qualified operators must
perform them.
Before any adjustment, replacement, maintenance or repairing operation is
carried out, the instrument must be disconnected from any power supply source.
When any protection failure is suspected to exist, the instrument must be
immediately put our of service. The instrument’s design allow a quick replacement in
case of any failure.
9.- TECHNICAL SERVICE
For any inquiry about the instrument performance or whether any failure
happens, contact to CIRCUTOR’s technical service.
CIRCUTOR S.A. - After-sales service
Vial Sant Jordi, s/n
08232 - Viladecavalls
Tel - + 34 93 745 29 00
fax - + 34 93 745 29 14
E-mail : [email protected]