CIRCUTOR CVM-C5 Series - Manual (Page 6)

1�- VERIFICATION UPON RECEPTION
Check the following points when you receive the unit:
a) The unit meets the specifications described in your order.
b) The unit has not suffered any damage during transport.
c) Perform an external visual inspection of the unit prior to switching it on.
d) Check that it has been delivered with the following:
- An installation guide,
- 2 Retainers for subsequent attachment of the unit
If any problem is noticed upon reception, immediately contact the transport
company and/or CIRCUTOR's after-sales service.
2�- PRODUCT DESCRIPTION
The CVM-C5 unit measures, calculates and displays the main electrical parameters of the
following networks: single-phase, two-phase, with and without neutral, balanced three-phase,
with ARON measurements or unbalanced. The measurement will be taken in RMS with the
three AC voltage inputs and three current inputs.
There are 2 versions of the team based on the current input:
 CVM-C5-IC, indirect mesure corrent with transformers /5A and /1A.
 CVM-C5-MC, indirect measure current with efficient transformers series MC1 and
MC3.
The unit features:
- 3 keys that allow you to browse between the various screens and program the unit.
- LCD Display to display all the parameters,
- 1 digital input to select the tariff.
- 1 programmable digital output to act as a pulse or alarm output.
6
CVM-C5
Instruction Manual