CIRCUTOR CVM-C5 Series - Manual (Page 33)

The maximum value: above this value the transistor is closed.
To enter or modify the maximum value, press the key
repeatedly, increasing the value of the flashing digit.
When the on-screen value is that desired, press the
key to
go to the next digit to modify the other values.
If you press the key after modifying the last digit the decimal point position will be
programmed.
To validate the information and proceed to programming the minimum value, press
.
The minimum value: below this value the transistor is closed.
To enter or modify the minimum value, press the key
repeatedly, increasing the value of the flashing digit.
When the on-screen value is that desired, press the
key to
go to the next digit to modify the other values.
If you press the key after modifying the last digit the decimal point position will be
programmed.
To validate the information and proceed to programming the delay value, press .
This is where the device's connection and disconnection delay (in
seconds) are programmed.
To enter or modify the delay value, press the
key repeatedly,
increasing the value of the flashing digit.
When the on-screen value is that desired, press the
key to
go to the next digit to modify the other values.
Once the delay has been programmed, press the key to go to the next programming step.
In Table 13 we can see the functioning of the digital output based on the programmed maxi-
mum and minimum values.
33 Instruction Manual
CVM-C5