Channel Master DVR+ (7500GB16) - Manual (Page 3)

III
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use the apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Unplug the apparatus during lightning storms or when unused for long periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into it, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14 Do NOT expose the remote control batteries to excessive heat such as fire or sunshine.
15 WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping or
splashing.
16 The power adapter must remain easy to unplug from the power socket once the equipment is installed.
17 Some safety related markings can be found on the bottom of the apparatus.
18 CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Installation
• Locate the power adapter and receiver indoors in an open, well-ventilated area. Do not place them in an enclosure (such
as a cabinet) without proper ventilation.
• Place the receiver on its feet on a firm, stable, horizontal surface.
• Unplug the power adapter from the power socket during installation and follow all connection instructions.
• Only connect the original power adapter to the receiver. Other power adapters may damage the circuitry and cause a fire
risk.
• Do NOT place heavy objects on the receiver or power adapter.
• Keep plastic packaging and small parts away from babies and children.
Protect from water
• Do NOT place objects filled with liquids, such as vases or drinks, on or near the power adapter or receiver.
General Precautions
• Do NOT remove the power adapter cover due to risk of electric shock from live parts inside.
• Do NOT allow objects to drop or be pushed inside the receiver, for example by children.
• Do NOT place naked flames such as lighted candles on or near the receiver or power adapter.
Equipment Care
• Unplug the power adapter from the power socket before cleaning.
• If the power adapter or receiver is damaged, unplug it from the power socket and have it checked by qualified personnel
before operating it any further.