Channel Master DVR+ (7500GB16) - Manual (Page 26)

20 :: Using the DVR+
Changing channels
You can change channels on your DVR+ receiver in several ways.
When you are viewing live TV you can:
• Press the
CH+ or CH- button on the remote control, OR
• Enter the channel number using the numeric keypad.
• Press
GUIDE on the remote to view the list of all currently
available channels. Then highlight a current program on a
different channel, press
OK and select Watch this program.
Controlling the sound from your TV
• Press the VOL+ or VOL- button on the remote control to
raise or lower the volume on your TV.
• Press the MUTE button on the remote control to turn off the
sound on your TV; press MUTE again or VOL+ or VOL- to
restore the sound.
Note: You must program you new Channel Master DVR+ remote
to control the
VOL+ or VOL- and MUTE functions of your TV. See
pages 10-15 for more information on programming your remote.
Controlling digital audio
Your new DVR+ receiver offers several digital audio features to
enhance your enjoyment of many programs and events. Most of
these options are in the Digital Audio Setup submenu within the
TV & Audio Setup menu under Settings:
Using the DVR+ receiver
If channels are missing
If there are subscription-
free over-the-air channels
in your local area that you
do not see listed in the
DVR+ program guide,
then try the following:
• Press
MENU
on the remote.
• Navigate on the left to
select SETTINGS.
• Scroll the list to select
Technical Information.
• Scroll the list to select
Signals and Network.
• Verify that your Signal
Strength and Signal
Quality are both at
least 30.
• If not, then readjust
your OTA antenna.
If one channel is missing,
perform a Manual Scan
from the Tuning submenu.
If several channels are
missing, then perform a
Full Re-Scan instead.
Press MENU
on the remote.
Navigate on the left to
SETTINGS and press
OK .
Scroll the list of Settings to
highlight TV & Audio Setup
and press
OK .
Scroll the list of items to
highlight Digital Audio Setup
and press
OK .