Channel Master DVR+ (7500GB16) - Manual (Page 27)

21 Using the DVR+ ::
Setting your digital audio options
Many programs and events, especially those broadcast with high-definition video, also feature
multiple audio channels to enhance the enjoyment through your home theater. The following options
on your DVR+ can be used with other compatible equipment:
• HDMI can be set to Stereo only if you are not connecting the HDMI output of your DVR+ to
a device capable of multi-channel surround sound. The default setting for this output is Auto
Stereo/Surround, which will output the best audio option present in the broadcast.
• Optical Digital Audio can be set to Stereo only if you are not connecting the OPTICAL output of
your DVR+ to a device capable of surround sound. The default setting for this output is Multi-
channel, which is supported by most equipment which will accept optical digital audio input(s).
• Midnight Mode helps you keep from disturbing others in your home by compressing the
dynamic range (that is, how big a difference there is between the loudest and quietest sounds)
of the digital audio output signal. The default setting for this mode is On.
Getting program information on your DVR+
A banner is displayed across the bottom of the screen for a few seconds whenever you change
channels on your DVR+. This banner shows details about the current channel and programming.
With this banner displayed, you can press the navigation buttons (up, down, right, and left) on
the remote control to browse current or future program information for the next highest or lowest
channel, or display the current or future programs scheduled on the current channel.
When watching live TV, pressing the INFO button on the remote control displays an info banner
at the bottom ot the screen. Pressing INFO again dismisses the banner. When you highlight a
program on now or scheduled in the future displayed in the Program Guide, a box of more detailed
information will be displayed about the highlighted program. Pressing
INFO again dismisses the box.
You can also use information screens to help set a new recording or stop a recording in progress:
• Press the record button on the remote control to start recording a highlighted program on now,
or to set a recording for a future program.
• Press the record or the stop button again on a current program to stop a recording in progress.
Adjusting languages and captioning
There are dedicated buttons on the DVR+ remote control to help you set preferences for your audio
language and enable or disable closed captioning. While watching video using your DVR+:
• Press AUDIO on the remote and highlight the language for your audio. Some available
languages may not be broadcast in stereo; changing digital audio options cannot override this.
• Press CC on the remote to turn on Closed Captions if they are currently off; press the button
again to turn Closed Captions back off if they are currently on.