Casella CEL Software for the Microdust dust monitor - Manual (Page 40)

3. The boxes on the Graph y-axis show the display range.
Click inside the boxes and type the desired values, then use the
Re-scale button to change this range.
The intermediate values will be adjusted automatically.
4. Use Auto Scale to allow the y-axis to accommodate the maximum
and minimum values.
It is suggested that you let the run progress long enough to encounter
typical maximum and minimum values before using Auto Scale .
5. Press one of the buttons in the Timebase area to select an x-axis time
base period of:
1 minute , 10 minutes, 1 hour, or 5 hours.
3.7 Gravimetric Correction by WinDust pro
Software
Data files stored by the PC may be automatically scaled and correlated to a
gravimetric filter result. This ensures optimum calibration to suit local
measurement conditions (Particle size, shape and chemical composition).
Figure 18: The Real-Time window
Page 40 of 60
Application
Software MICRODUST pro Aerosol Monitoring System &
WINDUST pro Application Software - Handbook