Casella CEL Software for the Microdust dust monitor - Manual (Page 31)

3. WINDUST pro APPLICATION SOFTWARE
WinDust pro Application Software supports the data logger facilities offered
by the MicroDust pro. It is specifically written by Casella CEL to simplify the
process of instrument configuration, downloading and data presentation.
Applications
¤ Monitoring respirable dust levels
¤ Work place monitoring
¤ Process monitoring
¤ Walk through survey
¤ Evaluation of filtration equipment performance
¤ Ambient air quality
¤ Detection of total dust emissions
¤ Indoor air pollution monitoring
The application, supplied on two 1.4 MB 3 1 /
2
“ floppy disks, is designed to
operate within the 32 bit environment of Windows 95 and later or Windows
NT 4 and later.
The instrument communicates with the PC using an RS 232 serial port.
3.1 Installation on Windows 95™, 98™, ME™,
Windows NT™ & Windows 2000™
System Requirements:
IBM TM compatible PC with Pentium or better processor,
At least 8 MB of free RAM space,
Microsoft Windows 95/98/ME/NT, Windows 2000,
Hard drive with at least 4 MB of free space,
RS 232 Serial Communication Port,
3 1 / 2 “ high density (1.4 MB) floppy disk drive for program installation,
Super VGA colour monitor,
Printer - optional.
Before installation, it is recommended that a back-up copy be made of the
program disks. Keep the originals in a safe place and use the copy to install
the software. The Setup program for WinDust pro will install files in the
specified Program directory and also in the Windows\System directory.
1.
Start Windows.
2. Insert WinDust pro Disk 1 into the floppy disk drive.
3. Select Start from the task bar, then Run…
Page 31 of 60
Application
Software
MICRODUST pro Aerosol Monitoring System &
WINDUST pro Application Software - Handbook