Canon PIXMA iP2600 - Manual (Page 35)

31 Routine Maintenance
Replacing a FINE Cartridge
This section explains the way to confirm the ink status and the procedure to replace FINE
Cartridges.
When ink runs out or other errors occur, the Alarm lamp flashes orange to inform you of the error.
See “Alarm Lamp Flashes Orange” on page 53 and confirm how to handle it.
„ Getting the Ink Status Information
You can confirm the status of each FINE Cartridge on the printer status monitor (Windows) and
Canon IJ Printer Utility (Macintosh).
(A) Confirm whether any symbols are displayed here.
Ink is low. You can continue printing for a while, but we recommend you to have a new
FINE Cartridge available.
Ink has run out. Confirm the number of the times the Alarm lamp is flashing, and see “Four
Flashes: Ink has run out.” on page 53 in “Alarm Lamp Flashes Orange” on page 53, and
take appropriate action.
Note
z If there is no improvement with the quality of printing following such maintenance as Print Head
Cleaning, a FINE Cartridge is probably empty. When ink runs out, replace the FINE Cartridge.
The printer cannot print if the wrong type of FINE Cartridge is used.
z For information on compatible FINE Cartridges, see the back cover of this guide.
Note
The ink level detector is mounted on the printer to detect the remaining ink level. The printer
considers as ink is full when a new FINE Cartridge is installed, and then starts to detect a
remaining ink level. If you install a used FINE Cartridge, the indicated ink level of it may not be
correct. In such case, refer to the ink level information only as a guide.
Note
Message may be displayed during printing. Confirm the displayed message and take appropriate
action.
(A)
(A)