Applied Motion BLuDC4-Si - Manual (Page 24)

24 24 24 24 24
BLuDC-Si Hardware manual BLuDC-Si Hardware manual BLuDC-Si Hardware manual BLuDC-Si Hardware manual BLuDC-Si Hardware manual
Breakout Box for DB-25 Connectors
BOB-1, includes cable
Screw Terminal Connectors that mate directly to the DB-25 connector on the front panel of the
drive:
Phoenix Contact P/N 2761622
This connector is not available from Applied Motion. You must purchase it from a
Phoenix distributor.
Mating Cable for IN/OUT connector with “flying leads”
Black Box P/N: BC00702
This cable is not available from Applied Motion. You must purchase it from
Black Box .
Useful for custom wired applications. This shielded cable has a DB-25 connector on each
end. You can cut off the female end to create a 6 foot “DB-25 to flying lead cable”.
It’ll be easier to wire if you get the
cable color chart from Black Box’s web site .
Regeneration Clamp:
Applied Motion Products RC050 .