Applied Motion TXM24IP-1EG - Manual (Page 12)

12
Rev. C
920-0089
TXM24 Ethernet Hardware Manual
3.2 Connecting the TXM24 Communications
The communications interface for the TXM24 Ethernet is one standard 4-pin M12 connectors. The
TXM24 is configured by Step-Servo Quick Tuner with Ethernet link, and then may be deployed on
a distributed Ethernet network. Below are descriptions of how to interface Ethernet communication
type to a PC.
3.2.1 Connecting to the PC using Ethernet
Communication port
Signal Pin no.
TX+ 1
RX+ 2
TX- 3
RX- 4
Model
Communications
Ethernet
TXM24S-3EG, TXM24S-1EG 
TXM24Q-3EG, TXM24Q-1EG 
TXM24IP-3EG, TXM24IP-3EG 
View of motor side connector 1551529