Applied Motion TXM24C-1CG - Manual (Page 11)

11
Rev. D
920-0088
TXM24C Hardware Manual
3 Installation/Connections
To meeting the IP65 protection, a suitable mating connector should be chosen. We recommend
vendor Phoenix Contact that offers mating cable with perfect match to our motor.
You can also check information of recommended mating cable from Phoenix in Accessories
section.
3.1 Connecting the Power Supply
Use 16 to 20-gauge wire if you want to build cable by yourself. TXM24C contains an internal fuse
connected to the “+” terminal that is not user replaceable. If a user serviceable fuse is desired,
install a 6.3 amp fast acting fuse in line with the “+” power supply lead.
Be careful not to reverse the wires. Reversing the connection may open the internal
fuse on the drive and void the warranty.
Power
Signal
Color of mating cable
Phoenix P/N 1431678
Pin no.
V+ BN\BU 1\3
V- WH\BK 2\4
View of motor side connector
CANopen Com port1
(Shared with RS-232）
Digital I/O
Power CANopen Com port2
2
3 4
1
J2