ABUS Technologies Log Box-AA Data Logger - Manual (Page 5)

ABUS TECHNOLOGIES INC.
5
Log Box-AA
2.2 Memory Capacity
Two memory storage capacities are offered: 32K or 64K records:
32k Model: Allows up to 32,000 records;
64k Model: Allows up to 64,000 records;
Memory capacity is always shared between enabled channels. In case there are two channels
enabled, each gets 50 percent of the memory available. When only a single channel is enabled, it has
the entire memory at its disposal. Memory capacity is indicated on the identification label placed on the
logger case.
Identification label
2.3 Input Signals
The input channels 1 and 2 measure analog electric signals, which can be Pt100,
Thermocouple (J, K, T, E, N, R, S or B), voltage (0 to 50 mV or 0 to 10 V) or current (0 to 20mA or 4 to
20mA), according to user-defined settings.
Note: Besides configuration performed through the software, the definition of input signal requires two
internal jumpers to be configured.
2.4 Data Acquisition (logging)
Data can be acquired through different modes. The logger can be configured to perform a
single measurement within a time interval storing the value read or perform ten measurements within
the time interval and store the mean of values measured. Yet, it can store the minimum or maximum
values read in the interval.
3. DIMENSIONS