D-Link DGL-4300 - Manual (Page 21)

Using the Configuration Interface
21 D-Link Systems, Inc.
PPPoE WAN Mode
A method of connection that requires you to enter a Username and Password (provided by your
Internet Service Provider) to gain access to the Internet.
The username that you use to login to your Internet connection.
Enter the password associated with your username.
Retype the password for verification.
If your ISP requires a service name, enter it here.
Typically PPPoE connections are not always on. The D-Link Router allows
you to set the connection mode:
• Always on: A connection to the Internet is always maintained.
• On demand: A connection to the Internet is made as needed.
• Manual: You have to open up the Web-based management interface
and click the Connect button manually any time that you wish to connect
to the Internet.
Defines how long the machine can be idle before the PPPoE connection
is disconnected.
The Disconnect button will immediately terminate any active connection.
Note: These buttons become enabled after the router has been rebooted
with the PPPoE mode selected.
Username:
Password:
Verify Password:
Service Name:
Reconnect Mode:
Maximum Idle Time:
PPPoE Connection:
Basic > WAN > PPPoE