beautypg.com

Glossary of tire terminology – Subaru 2006 B9 Tribeca User Manual

Page 359

background image

13-6

Consumer information and Reporting safety defects

T

Vehicle placard

The vehicle placard is affixed to the

driver’s side B-pillar.

Example:

The vehicle placard shows original

tire size, recommended cold tire infla-

tion pressure on each tire at maxi-

mum loaded vehicle weight, seating

capacity and loading information.

T

Adverse safety consequences

of under-inflation

Driving at high speeds with exces-

sively low tire pressures can cause

the tires to flex severely and to rapidly

become hot. A sharp increase in tem-

perature could cause tread separa-

tion, and failure of the tire(s). Possi-

ble resulting loss of vehicle control

could lead to an accident.

T

Measuring and adjusting air

pressure to achieve proper infla-

tion

Check and, if necessary, adjust the

pressure of each tire (including the

spare) at least once a month and be-

fore any long journey. Check the tire

pressures when the tires are cold.

Use a pressure gauge to adjust the

tire pressures to the specific values.

Driving even a short distance warms

up the tires and increases the tire

pressures. Also, the tire pressures

are affected by the outside tempera-

ture. It is best to check tire pressure

outdoors before driving the vehicle.

When a tire becomes warm, the air in-

side it expands, causing the tire pres-

sure to increase. Be careful not to

mistakenly release air from a warm

tire to reduce its pressure.

„

Glossary of tire terminology

y

Cold tire pressure

The pressure in a tire that has been

driven less than 1 mile or has been

standing for three hours or more.

y

Maximum inflation pressure

The maximum cold inflation pressure

to which a tire may be inflated.

y

Recommended inflation pres-

sure

The cold inflation pressure recom-

mended by a vehicle manufacturer.

y

Intended outboard sidewall

1)The sidewall that contains a

whitewall, bears white lettering or

bears manufacturer, brand, and/or

model name molding that is higher

or deeper than the same molding

on the other sidewall of the tire, or

2)The outward facing sidewall of an

B00326

TIRE AND LOADING INFORMA

AND LOADING INFORMATION

SEATING CAPACITY:TOTAL 7

ORIGINAL TIRE SIZE

COLD TIRE

INFLATION PRESSURE

COLD TIRE

INFLATION PRESSURE

FRONT 230kPa,33PSI
REAR 220kPa,32PSI

P255/55R18

T165/80R17

420kPa,60PSI

COMPACT SPARE TIRE

FRONT 2:REAR 5

The combined weight of occupants and cargo
should never exceed 525kg or 1157lbs.

SEE OWNER’S MANUAL

SEE OWNER’S MANUAL FOR

FOR

ADDITIONAL

ADDITIONAL INFORMA

INFORMATION

TION

EX

D00100

This manual is related to the following products: