beautypg.com

Subaru 2006 B9 Tribeca User Manual

Page 259

background image

8-14

Driving tips

Cargo can be carried after securing the

roof crossbar kit to the roof rail and install-

ing the appropriate carrying attachment.

When installing the roof crossbar kit, fol-

low the manufacturer’s instructions.

When you carry cargo on the roof using

the roof crossbar kit and a carrying attach-

ment, never exceed the maximum load

limit explained in the following. You should

also be careful that your vehicle does not

exceed the Gross Vehicle Weight Rating

(GVWR) and front and rear Gross Axle

Weight Rating (GAWR). See the “Loading

your vehicle” section in this chapter for in-

formation on loading cargo into or onto

your vehicle. The maximum load limit of

the cargo, crossbars and carrying attach-

ment must not exceed 150 lbs (67.5 kg).

Place the heaviest load at the bottom,

nearest the roof, and evenly distribute the

cargo. Always properly secure all cargo.

T Installing carrying attachments on

the crossbars

When installing any carrying attachment

such as a bike carrier, ski carrier, kayak

carrier, cargo basket, etc. on the cross-

bars, follow the manufacturer’s instruc-

tions and make sure that the attachment is

securely fixed to the crossbars. Use only

attachments designed specifically for the

crossbars. A set of the crossbars is de-

signed to carry loads (cargo and attach-

ment) of not more than 150 lbs (67.5 kg).

Before operating the vehicle, make sure

that the cargo is properly secured on the

attachment.

NOTE

Remember that the vehicle’s center of

gravity is altered with the weight of the

load on the roof, thus affecting the

driving characteristics.

Drive carefully. Avoid rapid starts, hard

cornering and abrupt stops. Crosswind

effects will be increased.

T Removal and installation of the

crossbars

Each of the two roof molding has two

mounting points for crossbars. Each

mounting point is fitted with a cover. Use a

screwdriver to remove the covers. When

installing the crossbars on the roof mold-

ing, follow the manufacturer’s instructions.

y

When using the roof crossbar kit,

make sure that the total weight of

the crossbars, carrying attach-

ment and cargo does not exceed

the maximum load limit. Overload-

ing may cause damage to the ve-

hicle and create a safety hazard.

800205

This manual is related to the following products: