Subaru 2007 Legacy User Manual

Page 358

Black plate (363,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

. Do not splash the engine coolant

over painted parts. The alcohol
contained in the engine coolant
may damage the paint surface.

! Changing the coolant
Always add genuine Subaru cooling sys-
tem conditioner whenever the coolant is
replaced.
Change the engine coolant and add
genuine Subaru cooling system condi-
tioner using the following procedures
according to the maintenance schedule
in the

“Warranty and Maintenance Book-

let

”.

1. Remove the under cover.

2.5-liter models
1)

Drain plug

3.0-liter models
1)

Drain plug

2. Place a proper container under the
drain plug and loosen the drain plug.
3. Loosen the radiator cap to drain the
coolant from the radiator. Then drain the
coolant from the reserve tank. Tighten the
drain plug securely.

WARNING

Never attempt to remove the radia-
tor cap until the engine has been
shut off and has cooled down
completely. Since the coolant is
under pressure, you may suffer
serious burns from a spray of boil-
ing hot coolant when the cap is
removed.

4. Install the under cover.

Maintenance and service

11-15

– CONTINUED –