Subaru 2007 Legacy - Manual (Page 264)

Black plate (269,1)
北米Model "A2420BE-B" EDITED: 2006/ 7/ 26
to the “R” position has become impossi-
ble, turn the ignition switch back to the
“ON” position then move the selector lever
to the
“P” position. Pressing the selector
lever release button also makes it possible
to move the selector lever to the
“P”
position at this time.
! Selector lever release button
If you inadvertently have turned the igni-
tion switch to the
“OFF” position with the
selector lever in the “N” position, proceed
as follows. By referring to the “Shift lock
release ” section in this chapter, remove
the shift lock release cover. Then, with the
screwdriver inserted into the hole, move
the selector lever to the
“P” position. If the
selector lever reverse inhibiting function
fails, have the vehicle inspected by the
nearest SUBARU dealer.
& Selection of manual mode
Turbo models
Non-turbo models
For turbo models, with the vehicle either
moving or stationary, move the selector
lever from the
“D” position to the manual
gate to select the manual mode.
For non-turbo models, with the vehicle
either moving or stationary, move the
selector lever from the
“D” position to the
manual gate then move it to the “+” end or
“−” end of the manual gate to select the
manual mode.
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator
When the manual mode is selected, the
gear position indicator and upshift indica-
tor and/or downshift indicator in the
tachometer come on. The gear position
indicator shows the currently selected
gear in the 1st-to-5th-gear range. The
Starting and operating
7-27
– CONTINUED –
7