beautypg.com

Automatic transmission – 5- speed – Subaru 2007 Legacy User Manual

Page 261

background image

Black plate (266,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

7-24

Starting and operating

4. Insert the screwdriver into the hole.
5. Push down on the screwdriver and
move the selector lever from the

“P” to the

“N” position.
6. Remove the screwdriver from the hole.
Depress the brake pedal and start the
engine.

Take your vehicle to the nearest SUBARU
dealer immediately to have the system
repaired.

Automatic transmission

– 5-

speed

The automatic transmission is electroni-
cally controlled and provides 5 forward
speeds and 1 reverse speed. Also, it has a
manual mode.
For turbo models, it also has an SI-DRIVE
mode.
For non-turbo models, it also has a
SPORT mode.

WARNING

Do not shift from the

“P” or “N”

position into the

“D” or “R” position

while depressing the accelerator
pedal. This may cause the vehicle
to jump forward or backward.

CAUTION

. Shift into the “P” or “R” position

only after the vehicle is comple-
tely stopped. Shifting while the
vehicle is moving may cause
damage to the transmission.

. Do not race the engine for more

than five seconds in any position
except the

“N” or “P” position

when the brake is set or when

chocks are used in the wheels.
This may cause the automatic
transmission fluid to overheat.

. Avoid shifting from one of the

forward driving positions into the

“R” position or vice versa until
the vehicle has completely
stopped. Such shifting may
cause damage to the transmis-
sion.

. When parking the vehicle, first

securely apply the parking brake
and then place the selector lever
in the

“P” position. Avoid parking

for a long time with the selector
lever in any other position as
doing so could result in a dead
battery.

NOTE

. When the engine coolant tempera-
ture is still low, your vehicle

’s auto-

matic transmission will up-shift at
higher engine speeds than when the
coolant temperature is sufficiently high
in order to shorten the warm-up time
and improve driveability. The gearshift
timing will automatically shift to the
normal timing after the engine has
warmed up.

. Immediately after ATF (automatic