Subaru 2012 Tribeca Navigation System - Manual (Page 41)

40
Setting Route
■ “Coordinates” method
You can set destinations or waypoints using their latitudes and longitudes as follows:
1 Enter the latitude of the desired location.
Use the numeric keys together with the [°] (degrees), [’] (minutes), and [“] (seconds)
keys.
2 Enter the longitude of the location.
: Use this key to switch over to the north latitude.
: Use this key to switch over to the south latitude.
: Use this key to switch over to the west longitude.
: Use this key to switch over to the east longitude.
: Use this key to delete the character last entered. Select it repeatedly if you
want to delete all the characters entered.
First, choose either of the two procedures below to follow the “coordinates” method.
• Press the button or select , select (destination entry), and then select (coordinates).
• Press the button and select (coordinates).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 40