TOYOTA 2011 Sienna - Manual (Page 687)

629
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
Turn the engine switch to the “ON” position (vehicles without a
smart key system) or “ENGINE START STOP” switch to IGNI-
TION ON mode (vehicles with a smart key system).
Press and hold the tire pressure
warning reset button until the tire
pressure warning light flashes
slowly 3 times.
Vehicles without a smart key system: Wait for a few minutes
with the engine switch in the “ON” position and then turn the
engine switch to the “ACC” or “LOCK” position.
Vehicles with a smart key system: Wait for a few minutes with
the “ENGINE START STOP” switch in IGNITION ON mode
and then turn the “ENGINE START STOP” switch off.
STEP 3
STEP 4
STEP 5