TOYOTA 2011 Sienna - Manual (Page 396)

3
W
hen
troub
le
arise
s
47
3-1. When you think a malfunction has occurred
SIENNA AAS_U (OM45460U)
If the AUTO ACCESS SEAT does not move while outside the vehicle
Initializing the seat position information
If the AUTO ACCESS SEAT does not move, first initialize the seat
position information.
Shift the shift lever to P.
Open the right-hand sliding door fully.
Unbuckle the seat belt if it is buckled.
If the AUTO ACCESS SEAT does not move even when the switches
are pressed, check and replace the fuses as necessary. (
→P. 38)
If the AUTO ACCESS SEAT still does not move even after the fuses
have been checked and replaced, have the seat inspected by your
Toyota dealer.
If the AUTO ACCESS SEAT stops moving while raising, lowering
or rotating, or while it is outside the vehicle, you will not be able to
close the right-hand sliding door. Use the techniques outlined here
to stow the seat inside the vehicle. If the AUTO ACCESS SEAT is
occupied, move the occupant to a safe place before conducting the
operation.
STEP 1
STEP 2
STEP 3