TOYOTA 2011 Sienna - Manual (Page 332)

281
2-4. Using other driving systems
2
Wh
en drivin
g
Selecting conventional constant speed control mode
Dynamic radar cruise control can be used as conventional cruise
control if you select constant speed control mode.
Press the “ON-OFF” button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
Vehicles without a smart key sys-
tem:
Vehicle-to-vehicle distance con-
trol mode is always reset when
the engine switch is turned to the
“ON” position.
Vehicles with a smart key system:
Vehicle-to-vehicle distance con-
trol mode is always reset when
the “ENGINE START STOP”
switch is turned to IGNITION ON
mode.
Switch to constant speed con-
trol mode.
(Push the lever forward and
hold for approximately one
second.)
Cruise control indicator will come
on.
Adjusting the speed setting:
→P. 277
Canceling and resuming the
speed setting:
→P. 279