TOYOTA 2011 Sienna - Manual (Page 269)

218
2-1. Driving procedures
■ Electronic key battery depletion
→P. 49
■ Conditions affecting operation
→P. 45
■ Note for the entry function
→P. 46
■ If the engine does not start
The engine immobilizer system may not have been deactivated. ( →P. 151)
■ Steering lock
After turning the “ENGINE START STOP” switch off and opening and closing
the doors, the steering wheel will be locked due to the steering lock function.
Operating the “ENGINE START STOP” switch again automatically cancels
the steering lock.
■ When the steering lock cannot be released
■ Steering lock motor overheating prevention
To prevent the steering lock motor from overheating, the motor may be sus-
pended if the engine is turned on and off repeatedly in a short period of time.
In this case, refrain from operating the engine. After about 10 seconds, the
steering lock motor will resume functioning.
The green indicator light on the “ENGINE
START STOP” switch will flash and a
message will be shown on the multi-infor-
mation display. Press the “ENGINE
START STOP” switch while turning the
steering wheel left and right.