Mini 2012 Clubman User Manual

Page 32

Opening and closing

CONTROLS

Before and after each trip, check that the tail-
gate/Split Rear Barn Doors have not been inad-
vertently unlocked.

Malfunctions

The remote control may malfunction due to
local radio waves. If this occurs, unlock and lock
the car at the door lock with the integrated key.
If the car can no longer be locked with a remote
control, the battery in the remote control is dis-
charged. Use this remote control during an
extended drive; this will recharge the battery,
page

For US owners only

The transmitter and receiver units comply with
part 15 of the FCC/Federal Communications
Commission regulations. Operation is governed
by the following:
FCC ID:
LX8766S
LX8766E
LX8CAS
Compliance statement:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:

This device must not cause harmful interfer-
ence, and

this device must accept any interference
received, including interference that may
cause undesired operation.

Any unauthorized modifications or
changes to these devices could void the

user's authority to operate this equipment.

Using the door lock

You can set which parts of the car are unlocked,
page

Do not lock the vehicle from the outside if
there is any person inside, because the

vehicle cannot be unlocked from inside without
special knowledge.

When there is no alarm system or Comfort
Access, only the driver's door is locked

with the door lock.

To lock all doors, the fuel filler flap, and the tail-
gate/Split Rear Barn Doors together:
With the doors closed, press the interior central
locking button, page

, to lock the vehicle.

Unlocking and opening the driver or passenger
door, page

Lock the vehicle.

Lock the driver's door with the integrated
key via the door lock, or

press the safety lock button on the pas-
senger's door and close the door from
the outside.

Convenience operation

With an alarm system or Comfort Access, the
windows and glass roof can be operated via the
door lock.

Opening/closing

Hold the key in the position for unlocking or
locking.

Watch during the closing process to be
sure that no one is injured. Releasing the

key stops the operation.