Mini 2012 Clubman User Manual

Page 172

Mobile phone preparation Bluetooth

COMMUNICATIONS

171

If pairing was successful, the mobile phone
appears at the top of the list of mobile phones.
If the pairing was not successful: what to do if…,
refer to page

172

Following the initial pairing

The mobile phone is detected/connected in
the vehicle within a short period of time
when the engine is running or radio readi-
ness is switched on.

After identification, phone book entries are
imported from the mobile phone and/or SIM
card of the telephone, depending on the
telephone.

Specific settings may be necessary in some
mobile phones, e.g. authorization or a
secure connection, refer to the Owner's
Manual for the mobile phone.

Connecting a particular mobile phone

"Telephone"

"Bluetooth® (phone)"
All paired mobile phones are listed.

Select the mobile phone to be connected.

The assigned functions before the unpairing of
the mobile phone are assigned to the mobile
phone when it is reconnected. If a mobile phone
is already connected, then these functions are
deactivated if necessary.

Device options

Device options in devices that are paired and
connected can be activated or deactivated.

Configuring device

"Telephone"

"Bluetooth® (phone)"

Highlight the device to be configured.

Open "Options".

"Configure phone"

Activate/deactivate functions. At least one
function must be selected.

"Telephone"

"Additional telephone"

"Audio"

"OK"

If a device is assigned a function, this may deac-
tivate the function in an already connected
device and cause the other device to be
unpaired.

Exchanging the telephone and auxiliary
phone

If the telephone and auxiliary phone are con-
nected to the vehicle, the function can be
swapped between the two devices.

"Telephone"

"Bluetooth® (phone)"

"Swap phone/addit. phone"

Using the mobile phone as an audio
source

Using the audio-capable mobile phone as an
audio source. Activate Bluetooth audio, refer to
page

170