Naim Audio Mu-so - Manual (Page 7)

5
2. Network Connection
2.1.2: Wi-Fi Setup Using iOS Wireless Accessory
Configuration
Mu-so can take advantage of the Wireless Accessory
Configuration feature incorporated in iOS version 7.
Wireless Accessory Configuration enables a wireless
capable product such as mu-so to be configured
automatically to join the same wireless network as the iOS
mobile device. To use Wireless Accessory Configuration
follow the steps below:
• Ensure that the wireless network that your iOS device
is connected to is the one you wish your mu-so to use.
• Ensure mu-so is connected to a mains power supply
and not in standby mode. Ensure no network cable is
connected.
• Using the pin-tool supplied or a straightened paperclip
briefly press the mu-so side panel pin-hole button
to enter wireless set up mode. The status indicator
adjacent to the button will flash purple.
Note: If your mu-so is previously unused it may start up in
wireless set up mode with the indicator flashing purple.
• Open the wi-fi settings menu of the iOS device and
scroll down the display. Select the SET UP NEW
AIRPLAY SPEAKER item and follow the steps described.
Diagram 5 illustrates the wi-fi settings menu.
• The Wireless Accessory Configuration procedure will
now automatically send the network name and security
key that the iOS
device is using to
your mu-so and
set up its wi-fi
configuration.
• The mu-so
indicator will
stop flashing and
illuminate white
when the wireless
connection has
been successfully
established.
2.1.3: Wireless Setup Using iOS Wi-Fi Key Sharing
Mu-so can take advantage of the Wi-Fi Key Sharing feature
incorporated in iOS version 6 or later. Wi-Fi Key Sharing
enables a wireless capable product such as mu-so to
connect via USB to an iOS device and automatically copy
the network name and security key that the device is using.
To use Wi-Fi Key Sharing follow the steps below:
• Ensure that the wireless network that your iOS device
is connected to is the one you wish your mu-so to use.
• Ensure mu-so is connected to a mains power supply
and not in standby mode. Ensure no network cable is
connected.
• Connect the iOS device to the mu-so side panel USB
socket. The iOS device must be switched on and
unlocked.
• Using the pin-tool supplied or a straightened paperclip
briefly press the mu-so side panel pin-hole button.
The status indicator adjacent to the button will change
colour and flash.
• A dialogue window will display on the iOS device
screen requesting permission to share Wi-Fi settings.
Select “Allow”. Diagram 6 illustrates the dialogue
window
• After approximately 30 seconds mu-so will be available
for wireless streaming on your home network. The
mu-so side-panel indicator will illuminate white.
Diagram 6
Wi-Fi key sharing
Note: Wi-Fi Key
Sharing is only
available with iOS
Version 6 or later.
Diagram 5
Wireless Accessory
Configuration
Note: Wireless
Accessory
Configuration is only
available with iOS
Version 7 or later.